Note heat exchanger parts assembly and installation of equipment
When lifting to pay attention to the center of gravity of the equipment.
Adhesive gasket to the gasket groove of the heat exchanger, shall ensure that thegasket and plate gasket does not have sand, oil, iron, and flux and other debris, soas not to damage the seal, causing a leak.
Tighten the heat exchanger bolts, the force should be uniform, and continuouslymeasure the distance of the two compression plates inside to ensure the paralleldeviation between the two compression plates not more than 3MM, clamped to the required size, parallel deviation 1MM, so that the gasket pressure partial or slid off the gasket groove at the same time, while clamping side and inspected to observewhether there is a gasket, the plate dislocation and other phenomena.
More Information at Weihai Huanyu Chemical Machinery Heat Exchanger
In fact, the high temperature jacketed glass reactor has wide scope of application. From here: www.toption-china.com/products/glass-reactor-with-jacket-10l. Although it may be a rare word for most ordinary people, it does not influence that the glass reactors play an important role in our lives.
回复删除