Stainless Steel Reactor in Driving

Stainless Steel Reactor in Driving

1, the feeding should be preceded open agitator reactor, no noise, and normal, thematerial added to the reactor, the feed must not exceed the number of process requirements.
2, open the steam valve before opening the valve back, entered after the valve. Open the steam valve should be slow, so warm up on the jacket, the gradual step-up, the jacket pressure must not exceed the specified value.
3, the steam valve and cooling valve can not start, no-steam pipe passing hammerand collision gas.
4, open cooling water valves, the first open return valve, the latter entered the valve.Cooling water pressure not less than 0.1 MPa, was not allowed higher than 0.2 MPa.
5, the water ring vacuum pump, the pump after the first open water, stop the pumpwhen the pump stops after the first water, and water pump should be excluded.
6, always check the reactor operation, and found that exceptions should be shut down for maintenance.
7, cleaning titanium epoxy (enamel) reactor, the reactor are not allowed to use alkaline brush, be careful not to damage the enamel

More Information at Weihai Huanyu Chemical Machinery Reactor

...
Sources from Stainless Steel Reactor in Driving

Keywords: reactor, heat exchanger, pressure vessel