Steam autoclave reactor installation:
1, steam autoclave reactor should be installed on a sturdy, flat table, table height determinedbased on usage, equipment and table four weeks should be left a certain space (≥ 360cm), for the installation and later maintenance.
2, steam autoclave reactor installation requirements to the horizontal shaft and vertical, notvertical (tilt) equipment shall not be greater than the total height of 1 / 1000.
3, the device itself from the process to take over the spare parts, safety valve, must be equipped according to the requirements of the reactor.
4, steam autoclave reactor installation check all parts and transmission parts are solid and reliable, the connecting pipe, nozzle, gas-tight seal and do the whole test, should be no bubble, run, drip, drain phenomenon.
5, the steam autoclave reactor into gear before starting the # 46 machine oil, open handrotating fan motor enclosure card lazy to check for the phenomenon, the phenomenon of impeller without scraping the wall, clean the dirt inside the reactor before startup.Empty running 30 minutes no unusual noise, vibration, before the official feed production. Periodic replacement of the other production slowdown as oil.
More Information at Weihai Huanyu Chemical Machinery Reactor
...
Sources from Steam Autoclave Reactor Installation
Keywords: reactor, heat exchanger, pressure vessel
Hi,
回复删除Autoclaves are used for applications requiring constant pressure and temperature for long periods of time. It also widely used in rubber products, wood drying and preservative treatment, heavy metal. Thanks a lot...
Sterilization Indicators
I am associated with medical equipments and nice to see this informative blog that how can these products are helpfull in medical field.
回复删除autoclave manufacturer