Laboratory reactor knowledge

Laboratory reactor with a small introduction of knowledge
A small laboratory reactor placed in the room. More than one reactor in the equipment, should be separated. Each operating room shall have direct access to the outdoors or exit channel, well-ventilated place should ensure that equipment.

In the laboratory reactor installed reactor lid, the body should be to prevent the reactorvessel and reactor vessel lid sealing surface between each bump. Cover the reactorvessel at a fixed location on the kettle body carefully, tighten the main nut, must bediagonal, symmetric and gradually tighten in multiple places. Forced to be uniform,does not allow the reactor vessel cap tilted to one side, in order to achieve a good seal.

Laboratory reactor connected at the positive and negative nuts, except for the positive and negative rotating nut, two circular rotating relative to the sealing surfacemay not all parts are connected nut assembly lines should be painted oil. Needle valve sealing system line, just gently turn the needle valve, pressure tight cover, you can achieve a good seal. Hand drive action on the high-pressure magnetic rotaryreactor, check operation is flexible.

More Information at Weihai Huanyu Chemical Machinery Pressure Vessel

...

Sources from Laboratory reactor knowledge

Keywords: reactor, heat exchanger, pressure vessel